OEM Delta Rockwell 10″ Unisaw 3 Groove Motor Pulley 3/4″ Bore, 3-1/2″,1-3/4 Wide
3” motor pulley from a vintage Delta Unisaw. 3/4” bore. Three grooves. Comes with the set screw. Free shipping to all 50 States!!! Thanks, Steve
Vintage Rockwell Delta – Bullet Motor – Bearings Early Model Unisaw Table Saw
Set of 2. Replacement bearings for Rockwell/Delta « Bullet Motors » used on older model Unisaws. These bearings are rubber sealed on the extended race side and metal shielded on the other. They are equivalent to the original New Departure brand bearings that were used on these motors. These are high quality WJB brand bearings. Bearings have a 20mm ID (d), 47mm OD (D), 14mm wide outer race (B), and 15.24mm inner race (B1). The overall width is 15.875 mm (B2). Bearings: 87504 or ND87504 The last two pictures show a representative Unisaw and Bullet Motor. International buyers are responsible for all additional shipping costs such as duties, taxes, and customs clearance fees.
Vintage Delta Rockwell 10” Unisaw Serial # 118-3631 Hand Wheel & Lock Knob Set
About Us: Hello, We are a consignment store who has been in business selling on eBay since 2010 and now operating under different ownership. We offer items on behalf of consignment owners who have either gone out of business or no longer have space to house items. We list, provide storage, package and ship on a commission base. We do our best to describe our clients items and offer any details they have provided about them. We strive to take detailed pictures to show the condition of all items. Prices are set by the consignment owners and all offers are relayed to them upon receipt. At that point they instruct us to accept or counter offer. Please read our full description below for further details. Thank you 📎Please note that we have multiple qty available and you may not receive the exact piece that is pictured, but we can assure you they are all very similar in condition & appearance📎 Recently acquired and fully functional at time of removal from a Vintage Delta Rockwell 10″ Unisaw It is a used so please expect some minor scratches, surface rust, residue from use and other cosmetic imperfections. This item is to be used for its intended purpose. Use for any other reason outside of its intended purpose will nullify the refund offer. We did our diligence cleaning this item, but this item can still use a good wipe down upon receipt.
Vintage Delta Rockwell 10” Hand Wheel & Lock Knob Set
This item is to be used for its intended purpose. We did our diligence cleaning this item, but this item can still use a good wipe down upon receipt.
VINTAGE Delta Rockwell Unisaw Part #LTA-404 Trunnion Bracket w/mounting bolts.
Recently acquired and fully functional at time of removal from a Vintage Delta Rockwell 10″ Unisaw we believe to be a 1956 Model according to the Serial Number. **Purchase includes mounting bolts as shown in pictures.** **The last 2 pictures show the actual saw this part came off of** It is a used so please expect some minor scratches, residue from use and other cosmetic imperfections. This item is to be used for its intended purpose. Use for any other reason outside of its intended purpose will nullify the refund offer. We did our diligence cleaning this item, but this item can still use a good wipe down upon receipt.
Delta Rockwell Unisaw Trunnion Bracket Part # LTA-404 81w6
inkfrog terapeak Delta Rockwell Unisaw Trunnion Bracket Part # LTA-404 816 H3 W 6 # F18 Shipping cost charged is for delivery to one of the lower 48 USA states, elsewhere will have additional cost. Here is a used Delta Rockwell Unisaw Trunnion Bracket Part, # LTA-404. good used condition WITH RUST PRESENT. Enlarge the photos for inspection and general idea of what you are getting. If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. Shipping: we will ship USPS (shipping days are currently Tuesday and Thursday as of 11-11 ) insurance and tracking are included on all items, and tracking number will be emailed to buyer. Shipping cost charged is for delivery to one of the lower 48 USA states, elsewhere will have additional cost. Items listed for customer pick-up only cannot be shipped. If this item is offered with Free Shipping, it must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority , insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired, arrangements must be made and prepaid by the buyer. If you require an item by a specific date, inquire before purchasing, please! Large, heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items to be picked up by customer’s choice should be paid for in exact cash at time of pick-up, arranged by appointment. Payment: An invoice will be sent to you soon after the close of the auction. We accept payment via Paypal only, in accordance with ebay regulations. Payment is expected within 3 days. EBAY forwards all sales information, therefore, California State Sales Taxes are collected and forwarded to the state of California; the rate is 8 75%. DO NOT DUPLICATE OR COPY! Template Made By: © Listing and template services provided by inkFrog
PARTS – Delta Drive Drum Guard for Belt Sander 6×48
For Belt Sander Abrasive Finishing Machine 6×48. this will not fit every Delta sander ever made. BS-209 – includes BS-210 plate guard deflector and BS-211 dust deflector. PARTS – Delta Drive Drum Guard.
Matched Set of 3 V-Belts Unisaw Fenner PowerTwist Rockwell/Delta 49-124 3450 RPM
Matched Set of 3 Replacement V-Belts for Unisaws with 3450 RPM Motor and a 3.5″ diameter drive pulley. These saws were built with 26″ belts. This is a Fenner Drives PowerTwist link type belt that is an upgrade from the standard V-belts. It will provide longer life, reduced stretch, and reduced vibration. Replaces Rockwell Part Number: 49-124 International buyers are responsible for all additional shipping costs such as duties, taxes, and customs clearance fees
Custom Dust Door Cover for VINTAGE Delta Rockwell Unisaw.
This is a Custom designed dust door cover that can replace Delta Rockwell Part # LTA-480. The previous owner of the Saw had designed this to allow a Vaccum hose to be place in the opening. The hole measures 2.25″ across. Recently acquired and removed from a VINTAGE Delta Rockwell 10″ Unisaw we believe to be a 1956 Model according to the Serial Number. **The last 2 pictures show the actual saw this part came off of** It is a used so please expect some minor scratches, residue from use and other cosmetic imperfections. This item is to be used for its intended purpose. Use for any other reason outside of its intended purpose will nullify the refund offer. We did our diligence cleaning this item, but this item can still use a good wipe down upon receipt.