Milwaukee High Torque Impact Wrench 1/2″ 2967-22 | PACKOUT Socket Set SAE Metric

This listing is a combo that includes the 2967-22 Kit & 49-66-6805 PACKOUT Socket Set. M18 FUEL 18V Lithium-Ion Brushless Cordless High-Torque 1/2 in. Impact Wrench w/Friction Ring Kit [2967-22]The MILWAUKEE® M18 FUEL™ ½” High Torque Impact Wrench w/ Friction Ring is the most power-dense impact wrench in its class, provides greater access in tight spaces, and maximizes productivity through faster removal speeds. The POWERSTATE™ Brushless Motor delivers up to 1,100 ft-lbs of Fastening Torque and 1,600 ft-lbs of Nut-Busting Torque when paired with the M18™ REDLITHIUM™ FORGE™ Batteries, while the compact size at 7.6″ in length gives users greater access in tight spaces. The M18 FUEL™ ½” High Torque Impact Wrench w/ Friction Ring maximizes productivity on the jobsite and in the shop by removing stubborn bolts and fasteners faster than cordless competitors. The patented battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½” Friction Ring design allows for quick & tool-free socket changes. 2967-22 Kit Includes (1) M18 fuel 1/2 in. high torque impact wrench w/ friction ring (2967-20), (2) M18 REDLITHIUM XC5.0 resistant battery (48-11-1850R), (1) M18 and M12 multi-voltage charger (48-59-1812), (1) blow molded case 2967-22 FeaturesMost Power Dense – Best Combination of Power and Size.POWERSTATE™ Brushless Motor delivers up to 1,100 ft-lbs of Fastening Torque & 1,500 ft-lbs of Nut-Busting Torque w/ M18™ REDLITHIUM™ XC5.0 BatteryUp to 2″ Shorter Length. 7.6″ in length provides most access in tight spaces.Fastest Removal Speeds. Maximize productivity on the jobsite and in the shop.Patented battery isolation system ensures a secure battery connection and controls vibration transmitted to the packTri-LEDs deliver high definition lighting to increase workspace visibility with less shadows4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal modeBolt removal mode provides maximum nut-busting torque to break fastener free, then slows to 750 RPM for more control when removing fastenersAUTO-SHUTOFF™ control prevents over tightening and increases productivity by applying no more than 50 ft-lbs of torqueMode 1 IPMs: 0 – 1,300; Mode 2 IPMs: 0 – 2,200; Mode 3 IPMs: 0 – 2,400; Mode 4 IPMs: 0 – 2,400Mode 1 RPMs: 0 – 700; Mode 2 RPMs: 0 – 1,300; Mode 3 RPMs: 0 – 2,000; Mode 4 RPMs: FWD: 0 – 900, REV: 0 – 2,000 / 0 – 750Friction ring (hog ring) ensures quick and easy socket changesM18™ REDLITHIUM™ XC5.0 Resistant Batteries included provides increased protection against oils, greases, and solventsREDLINK PLUS™ Intelligence: Ensures maximum performance and protects from overloads, heating, and over-discharge.Compatible with all M18™ batteries & chargersSHOCKWAVE Impact-Duty 3/8 in. Drive Metric and SAE Deep Well Impact PACKOUT Socket Set (36-Piece) [49-66-6805] About This ProductMILWAUKEE SHOCKWAVE Impact Duty Socket Set features the boldest, longest-lasting markings and extreme impact durability in high torque applications. The stamped and ink-filled size marking enables you to select the right socket every time throughout the life of the socket. Engineered with high-strength forged steel for optimized performance in heavy-duty applications. The non-slip hex geometry prevents fastener rounding. The Milwaukee dual-hole design and ring groove allow for easy socket attachment and removal. Sets can be kept organized in the included PACKOUT Low-Profile Organizer with a clear top for easy identification of parts at a glance. The Low-Profile Organizer is part of MILWAUKEE PACKOUT Modular Storage System, allowing for customization of storage systems to easily transport and organize tools and accessories. All MILWAUKEE SHOCKWAVE Impact Duty Sockets and Extensions are backed by Milwaukee’s Lifetime Guarantee and meet ASME industry standards. 49-66-6805 Kit Includes 36 Deep SAE & Metric Sockets and 3 Impact Socket Accessories. The following sizes are included: 1/4 in., 9/32 in., 5/16 in., 11/32 in.,3/8 in., 7/16 in. 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1/4 in. hex to 3/8 in. square Socket Adapter, 3 in. extension, 3/8 in. Universal Joint, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm 49-66-6805 FeaturesOptimized for use with 3/8 in. drive impact wrenches, drivers, ratchets, and adaptersSet comes in Milwaukee Low Profile PACKOUT OrganizerSet comes in Low Profile PACKOUT OrganizerStamped and ink filled diameter markings for wear resistance6-point design made with forged impact steel for durability in high torque applications backed by our lifetime guaranteeDual hole design and groove for easier attachmentNon-slip hex geometry to prevent socket and fastener roundingLifetime guarantee covers impact sockets and extensions onlyRemovable Tray for easy storage in tool chestsMeets ASME Industry StandardsItems may Ship in Multiple Packages. All Tracking #’s will be provided. Beerman Precision Inc. is an Authorized Milwaukee Distributor. Proof of purchase will be provided in shipment which can be used for any Manufacturer Warranty claims on the items.