Scroll Saw Ryobi Table Insert – Set of TWO
Set of TWO inserts. These are Scroll Saw Mount Inserts the blade passes through. They have been 3D printed and fit any saw with the same width as the 3.174 inch or 80 mm diameter at the top. These were made for my Ryobi 16 in scroll saw to replace the one that came with the saw. It was a used saw and the previous owner had nicked up the insert as you can see in the photos. The black insert was the 1st try at printing and replacing the insert. They will fit the Ryobi, Skil, Dremel, and a 16″ Wen Scroll Saw I just bought new. These inserts are new and have been tested for fit. The PLA plastic is soft enough not to damage the blade if it contacts it. They come in a pair of orange color inserts so you can have a spare at a reasonable price. If you have a Central Machinery Variable Speed Scroll Saw you need the beveled inserts that we make for those saws. Search « Beveled Scroll Saw Inserts » those sell for the same price for two inserts that are black in color. If you have a saw insert with different dimensions, contact me and I’m sure with good measurements and some photos, Ben’s Creations can make one for your saw or application for you.
Band Saw Table Insert – Set of TWO
Set of TWO Band Saw Table Inserts.The obsolete part # 69156 for 113.244513 Band Saw and others using a 1.5 x 1.5 inch insert. These are Band Saw Table Inserts the blade passes through. They have been 3D printed and fit any saw with the same square width of 1.5 inches. These were made for a Craftsman 10 in table top band saw to replace the one that came with the saw that had broken. Please measure the opening and if it is the square 1.5 x 1.5 inch, these should fit your saw. These inserts are new and have been tested for fit. The PLA plastic is soft enough not to damage the blade if it contacts it. They come as a pair of black color inserts so you can have a spare at a reasonable price. Thanks for purchasing from Ben’s Creations. If you have a saw insert with different dimensions, contact me and I’m sure with good measurements and some photos, Ben’s Creations can make one for your saw or application for what you need. These can be made for zero clearance but you must send the exact measurement from the edge of the opening with a picture of the direction you measure.