Arrow Fastener T18 3/16in. W x 7/16in. L 18 Ga. Crown Wire Staples 1000pc,5 Pack
This pack of Arrow Fastener T18 staples is a must-have for any DIY enthusiast. With a crown wire design and a maximum fastener size of 3/16 inch, these galvanized steel staples are perfect for a variety of projects. The pack contains 1000 staples, meaning you'll have plenty to work with. These staples are compatible with Arrow Fastener T18 staple guns and are suitable for use in the home or workshop. They have a nail gauge of 18 and are 0.559 inches in length and 0.402 inches in width. The staples are gray in color and are made in the United States by Arrow Fastener Co LLC.
12 Volt Portable WINCH Remote Control Truck SUV Boat Car Vehicle ATV Recovery
Max Boat Size 18ft. Remote switch with 10ft lead. 6ft per minute pull speed with full load. Convenient carrying handle. Line Speed 6 feet/minute with load. If you order an electronic item for use outside the USA, that is at your own risk.
Band Saw Table Insert – Set of TWO
Set of TWO Band Saw Table Inserts.The obsolete part # 69156 for 113.244513 Band Saw and others using a 1.5 x 1.5 inch insert. These are Band Saw Table Inserts the blade passes through. They have been 3D printed and fit any saw with the same square width of 1.5 inches. These were made for a Craftsman 10 in table top band saw to replace the one that came with the saw that had broken. Please measure the opening and if it is the square 1.5 x 1.5 inch, these should fit your saw. These inserts are new and have been tested for fit. The PLA plastic is soft enough not to damage the blade if it contacts it. They come as a pair of black color inserts so you can have a spare at a reasonable price. Thanks for purchasing from Ben’s Creations. If you have a saw insert with different dimensions, contact me and I’m sure with good measurements and some photos, Ben’s Creations can make one for your saw or application for what you need. These can be made for zero clearance but you must send the exact measurement from the edge of the opening with a picture of the direction you measure.