Wen 2.3-Amp 8-Inch 5-Speed Cast Iron Benchtop Drill Press – Black & Orange

Features a 2.3A induction motor, an 8-inch swing, and a 2-inch spindle travelIncludes a 1/2-inch keyed chuck and onboard key storageOperates at 5 different speeds: 750, 1100, 1500, 2100, or 3200 RPM6.5 by 6.5 inch height adjustable worktable bevels up to 45 degrees in each directionMeasures in at 23 inches tall with a 7 by 11-inch baseRemember when you could drill with maximum accuracy? Power through metal, wood, plastics, and more with the WEN 8-Inch 5-Speed Drill Press. Don’t let our compact design fool you. Between the five operating speeds, the two-inch spindle travel, and the sturdy construction, you’ll have way more precision than a standard handheld drill. Our 2.3-amp induction motor features ball bearings for smooth balanced performance even at high speed. Manually set your speed to either 750, 1100, 1500, 2100, or 3200 RPM by adjusting the belt position on the two spindles. The easy-to-read, locking depth stop allows for accurate and repeatable drilling operations. The keyed chuck with JT33 spindle taper accepts bits ranging from 1/20 to 1/2 inch in diameter (1.5 to 13 mm). The table bevels 45° left and right for angled drilling. The base is designed with holes for mounting onto a bench or work stand. Clamps and vises are easily mounted to the slotted table, making work-holding safe and effective. And because its a WEN product, your drill press comes backed by a two-year warranty, a stocked inventory of replacement parts, and a helpful customer phone line. Remember when you could drill holes in almost anything? Remember WEN.