Rockwell 10″ Drill Press Depth Collar
The collar has two features you should look at before purchasing. The second is, the offset of the gauge connection is less than the thickness of the collar. To remove your broken collar, remove the chuck and undo the slide with the depth gauge.
Porter Cable DP Depth Collar
Porter Cable Model PCXB 620. The collar fits the quill above the chuck and has a lip on the bottom as a slide stop. There is an elongated gauge bolt hole and a relief to accommodate the gauge rod nut.
Table Saw Adjuster Craftman Pt#14900602 & Ace 10 in Model 27193A
This listing is for an obsolete adjustment hand wheel for a Craftsman 137.218740 Table Saw Part# 14900602. It now has a larger spinner grip. This will also fit an ACE 10 in BenchTable Saw Model # 27193A We were asked to make one for a customer and he sent the original hand wheel that is black in the photos. The part has been fit tested and will replace the original part. The diameter is 4.0 in, the height is 2 inches without the hand grip spinner. The hand spinner is 2 inches in length and makes the total 4 inches height. The handle has been beefed up in the nose gear area and spokes to prevent failure from torque load. The part will look different than the original, but all dimensions are the same. If you are replacing your adjuster handle, now is the time to blow out or brush out sawdust and lubricate all moving parts. A broken hand wheel may be an indication of a stuck, bent or dry parts. Thanks for your purchase from Ben’s Creations.
Scroll Saw Insert Craftsman 16″ Var Spd Pt# 11A02501
This listing is for TWO scroll saw inserts for a Craftsman 16 in Variable Speed Scroll Saw.They fit a model 137.216100 saw obsolete part # 11A02501 They were made for a customer who sent the original insert.The photo with the installed insert is from the customer who they were made for. They are 3D printed with plastic that will not harm the saw blade if contacted.They have been fit tested and used by the customer after making them. Contact Ben’s Creations if you have an obsolete part and we will see if we can help you get a replacement.Thanks for shopping with Ben’s Creations.
Craftsman 137.229250 Depth Gauge Collar
It has been fit tested and ready to install on your drill press. To remove your broken collar, consult your manual or find a video online explaining this process. The collar fits the tube above the chuck.
Titan SF16G & Clarke BT-1016 Scroll Saw Insert
TWO – Scroll Saw Table Inserts for Titan SF16G saw. These will fit a Clarke Woodworker Model BT1016 saw. These inserts were made for the above saw. They are plastic and will keep your work piece sliding through the blade.
WEN 9 Band Saw Inserts 2 versions
The narrow slot will prevent small cuts from being pulled down through the saw hole. These four inserts can be inserted either side.
Table Saw Adjuster for 1/2″ Arbor wFlat & New Big Spinner
This listing is for ONE replacement adjuster wheel for a Table Saw with 1/2″ – .500″ adjuster shafts and New Bigger Spinner Handles. BEFORE YOU BUY: Measure the adjuster shafts on your saw, if they are not 1/2″, .500″ in diameter, they will not fit. DO NOT PURCHASE! Measure the widest width of the shaft…not from the flat to the edge. This adjuster also comes with a tool to install the nut on the bolt in the spinner recess. These have been fit tested on a Craftsman and other brand Table Saws. These handle wheels are 4.75″ in diameter and will fit adjusters having a 1/2″ .500″ diameter shaft with a flat. The handle wheel has been beefed up more than the original plastic wheel handle that came on the saw. These are made on a 3D printer and I have a set on my table saw. The shaft diameter again is 1/2″ .500″ with a flat. The spinner for the adjuster mounts on a 1/4 x 1-1/2″ bolt and a NyLock nut which is included. We include a tool for this too. You will have to use the screw that came with your saw to hold the adjuster wheel on your saw. Most saws use 8-32 x 3/4″ or 10-32 x 3/4″ machine screw and washer to hold the handle wheel on the shaft. These handle wheels are a less expensive way to put the vise grips back in the tool box and make saw adjustments like you used too. Thanks for your purchase from Ben’s Creations.
Scroll Saw Craftsman Pt# 21979 Insert – Set of TWO
These are Scroll Saw Table Inserts the blade passes through. These were made for a Craftsman 351.216120 Scroll Saw. You can send us the original and we will make one exactly like the OEM part. These inserts are new and have been tested for fit.
Scroll Saw Delta 900200 – Set of TWO
Set of TWO inserts. Delta SS Insert Part # 900200 These are Scroll Saw Mount Inserts the blade passes through. They have been 3D printed and fit any saw with the same width as the 2.453 inch or 62.33 mm diameter at the top. Thickness is 0.113 inch or 2.88 mm, The slot is 0.375 inch or 9.51 mm wide. These inserts are new and have been tested for fit. The plastic is soft enough not to damage the blade if it contacts it. They come in a pair of red color inserts so you can have a spare at a reasonable price. If you have a saw insert with different dimensions, contact me and I’m sure with good measurements and some photos, Ben’s Creations can make one for your saw or application for you.Thanks for shopping with Ben’s Creations.