Micro Chuck Mandrel Adapter Rotary Tool Mini Holder for Rotary Tools 1/8″ Shank

MICRO CHUCK MANDREL – MININ CHUCK HOLDER ADAPTER FOR ROTARY HANDPIECE TOOL 0 – 1.00MM / 0 – 0.040″ CAPACITY SHANK SIZE 2 STEP – 1/8″ & 3/16″ HOBBY & JEWELRY – ACCESSORY HOLDER Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Miniature MICRO 4 Jaw Chuck Mandrel adapter, with a holding capacity range of 0 to 1.00mm drills and accessories. (The 3rd and 8th pictures show the chuck holding 1 mm thick wire) Mandrel shank has two holding diameters (a 1/8″ and 3/16″ Shank), the main body portion measures 3/16″ and the shank end is 1/8″ adapter can be held at either diameter. Micro Chuck is machined out of one piece steel, with a tightening nut. Mandrel is like a miniature pin vise that mounts on rotary tools, hand-pieces like Foredom, Dremel, Grobet, Pfingst to hold Micro Drills, Mini Polishers. Micro Chuck Adapter is a handy accessory that can be used to hold very small bits, used in Hobby, Jewelry and Watch making and repair work. SPECIFICATIONS: JETS Product # 1301-70125 – Overall Length: 1-21/64″ – 33.74mm – Shank 2 Position Holding Diameters: 1/8″ – 3.17mm at the end of mandrel & 3/16″ – 4.73mm just below the threads – Shaft Length: 11/32″ – 8.00mm – Main Body Diameter: 3/16″ – 4.73mm – Chuck Capacity: 5/128″ – 0.039″ – 1.00mm – Chuck Head Length: 5/8″ – 15.8mm – Chuck Nut Knurled Diameter: 9/32″ – 7.2mm – Chuck Nut Length: 3/8″ – 9.8mm – Material: Steel Black Anodized Note: This is our value economical priced Micro Chuck … you can see our US made item > eBay ID # 191457059630 NOTE: Visit JETS INC. ebay Store, where you can see various other types of Miniature Mandrels, Adapters, Chucks and Pin Vises and a wide range of many other Hand Tools and Supplies along with a selection of Jewelers Equipment Tools & Supplies. JETSINC. 1214 CKP 1E 4X-1E 15X-3E M P