Belt Sander CONVERSION PARTS FOR DeWalt Cut Off Saw DCS438, 3/8″ x 13″

** If you are not buying these parts from Miekk, you are buying an infringing knock-off. ** NOTE: An air sander and DeWalt cutting tool will be needed for this conversion, they are not included with these parts. Please open and read the entire description, it answers a lot of questions.These are custom made aluminum parts that will convert a DeWalt 3″ cut off tool and a Harbor Freight Baxter or similar belt sander into a DeWalt cordless 1/2″ x 18″ belt sander or band file. This only fits the US models DCS438 with the 3/8 (.375) arbor. I believe there is a European model that has a 10mm arbor and will need a 10mm drive pulley. I can change these to 10mm if that’s what you need, just note that at check out so I see it and make a special one.The air belt sanders can be found at Harbor Freight under central pneumatic, item numbers 60627 or 97055. They can be ordered from harbor freight.com or even on eBay by searching 60627 sander and checking on include descriptions. They are also sold as Rockwood pneumatic 31873.The DeWalt cut off tool DCS438 can be found nearly everywhere.You will receive 4 items; a custom machined adapter to hold the sanding arm from the sander, a new drive pulley, a T-10 Torx tool bit, and instructions as shown in the 2nd photo. Either tool can be converted back to it’s original state in a matter of seconds.Please check the sander size. There are two sizes. If you are looking for the 1/2″ x 18″ parts kit that uses the Baxter Pneumatic sander, go here: https://www.ebay.com/itm/275378925581If you have any questions, please contact me: Five O Seven, Three 8 One, Forty-two Sixty.Note: For the .02% of you don’t read the description and believe they are getting a $180 DeWalt tool and/or the air belt sander for $50, I will reiterate, the listing is for the conversion parts only! Neither the DeWalt tool nor belt sander are included. And no Karen, I’m not changing the photo just for you…. If you flip out, physically threaten me, and demand something that’s clearly not included, you’ll be reported to eBay. You clearly have no idea… If this is unacceptable, you have my address, you are welcome to come see me, I’d be happy to help clear things up for you in person.If you find you are one of the .02% and want to return it, I will accept the return if you chose « I changed my mind ». I won’t accept; « item doesn’t match the description » or « doesn’t work » or « defective ». Check the feedback for overwhelmingly satisfied users…Also: I retain a patent protecting my sales of parts that convert a cordless tool into a belt sander. Make your own, I don’t care, if the manufacturers come with this tool, I’m clearly done, but try to sell or market the parts, you’ll see a letter from the patent attorney. Fair warning.Thanks again!