USA Drywall Sander 780W Powerful Electric Dustless Wall Sander Vacuum Attachment

Brand Gioventù Product Dimensions 8.25″L x 8.25″W x 74″H Grit Type Fine Voltage 120 Volts Power Source Corded ElectricAbout this item Powerful 6.5-amp Brass Motor: Equipped with a powerful 6.5-amp motor, it delivers enough power to sand the surfaces quickly and efficiently. 7-speed control system lets you adjust between 900 and 1800 RPM to optimize efficiency. Unique Fixture&Flexible Head: This drywall sander comes with a unique fixture that keeps it at a vertical angle to sand ceilings. The 8-2/5 inch floating head that can swivel 360 degrees to easily fit any corner, edge or wall and it has a detachable chassis edge for working in tight corners and hard-to-reach places. Efficient Dust Absorption: The in-built vacuum system combines with a zippered dust bag and a 10-ft long dust hose and 26-ft power cord to reach tight corners that can absorb up to 95.5% dust particles, ensuring a safe and clean working environment. Extendable Handle&LED Light This drywall sander includes an aluminum extension rod that can be changed from 4.9ft-6.2ft in length, making it suitable for reaching higher spaces. In addition, the LED strip lights offer sufficient lighting to work in dark places without straining your eyes. Wide Usage: The sander comes with 12 pcs sanding discs that can be attached to the sanding plate with a hook-and-loop mechanism. This unit can grind many surfaces, including ceilings, paint coatings, drywall, interior walls, and plaster walls. Warranty: We offer 3-year factory warranty. Package list: 1 x drywall sander with vacuum attachment (26ft power cord), 12x sanding discs(A80/100/120/150/180/240), 1 x set of safety kit(1 x goggle 1 x earplugs, 1 x mask ), 1 x carrying bag, 1 x hook-and-loop fastener, 1 x dust collection bag, 3 x vacuum hose connectors, 1 x dust extracting hose, 1x hex wrench, 2 x carbon brushes, 1x user manual. Product Description Packge Include1 x drywall sander with vacuum attachment (26ft power cord)12x sanding discs(A80/100/120/150/180/240)1 x set of safety kit(1 x goggle 1 x earplugs, 1 x mask )1 x carrying bag1 x hook-and-loop fastener1 x dust collection bag3 x vacuum hose connectors1 x dust extracting hose1x hex wrench2 x carbon brushes Gioventù Drywall Sander with VacuumQuickly&EfficientlyUnique Patented Ball-Joint Design – 0-Resistence Easy Automatic Leveling95% Efficient Dust Absorption – ensuring a safe and clean working environmentPowerful 6.5-amp Brass Motor – sanding the surfaces quickly and efficiently Power Cable: 26ft Dust Hose: 10ft Weight: 11.7 lbs Sandpaper Diameter: 8-2/5” Paper Fitment: Hook & Loop Variable Speed: 900-1800 RPM Extendable Handle: 4.9ft-6.2ft Voltage: 120V，60Hz 360-degree Swiveling Base The base can swivel 360 degrees to easily fit any corner, edge or wall thereby ensuring that the entire wall is smoothened out evenly.Detachable Chassis Edge There’s a detachable sanding disk you can move quickly, getting access to tight corners & perpendicular walls.7-speed Control System The device has 7 variable speed options that you can adjust between 900 and 1800 RPM to optimize efficiency. TROUBLESHOOTING PROBLEM: Motor is not working Cause: 1) Wires in the main plug or in the socket are loose. 2) The switch is faulty.Solution: 1) Have the socket and plug checked by an authorized technician. 2) Have the switch replaced by an authorized technician.Unusual noises occur during operation/Motor is not working properly. Cause: 1) Switch contact has failed. 2) Components have jammed. 3) Too high of load has been applied.Solution: 1) Have the switch replaced by an authorized technician. 2) Have the tool checked and repaired. 3) Using less pressure during sanding operations.Motor gets hot Cause: 1) Foreign substances have gotten inside the motor. 2) Too high of load has been applied.Solution: 1) Have the foreign substances removed. 2) Have the switch replaced by an authorized technician.Frequent sparks occur on the commutator Cause: 1) There is a short circuit in the motor(armature) 2) Carbon brushes are worn out or jammed.Solution: 1) Have the armature replaced. 2) Have the carbon brushes checked.