2pcs – 5/8″-1 Female to 5/8″-11 Male Adapter Polish Adaptor Connecting
1. The adapter rod is made of 45# steel, which is hard and durable, not easy to deform and break.2. The adapter is a precision thread to ensure a firm fit between the matching threads, smooth operation, minimize vibration, and improve overall work efficiency.3. The polishing wheel adapter accessories are easy to install and disassemble, enabling the interoperability of tools of different specifications and making full use of the tools to complete the work flexibly.4. The grinder adapter converter is commonly used in metal processing, woodworking, and auto repair, and is matched with manual power tools such as rotary tool, grinding saws, concrete rotary tool, and wet polishers. The interface is connected with diamond drill bits, masonry hole saws, cup wheels, wool polishing wheels, chain saw wheels, and wood carving wheels.5.
M14 Female to M10 Male Adapter Polisher Connecting Attachment
1. The adapter rod is made of 45# steel, which is hard and durable, not easy to deform and break.2. The adapter is a precision thread to ensure a firm fit between the matching threads, smooth operation, minimize vibration, and improve overall work efficiency.3. The polishing wheel adapter accessories are easy to install and disassemble, enabling the interoperability of tools of different specifications and making full use of the tools to complete the work flexibly.4. The grinder adapter converter is commonly used in metal processing, woodworking, and auto repair, and is matched with manual power tools such as rotary tool, grinding saws, concrete rotary tool, and wet polishers. The interface is connected with diamond drill bits, masonry hole saws, cup wheels, wool polishing wheels, chain saw wheels, and wood carving wheels.5.
2PCS 2.2Ft Long 35x8x0.8mm Drill Press Return Spring Assembly
Quill SpringGeneral Information：[1]Pay attention to safe when installing springs. Do not loosen the wire of fixed springs![2]Inner Mounting Type : Hook; Outer Mounting Type : Hook[3]This is the chrome housed spring that returns the quill to the top after you have completed drilling.Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, safe coil spring and so on[4]Chemical Blackening, the performance of the product form oxide film, isolate the air, prevent rust[5] Expand Length : 680mm/26.8inch ; Spring OD : 35mm ; Material Width : 8mm ; Material Thickness : 0.8mm.
2 Roll 10M Nickel-Plated Steel Strip for Battery Spot Welding 5×0.15mm
What is this?Widely used in nickel-metal battery, pole ear,polymer battery, electric tools, combination battery, telecommunications, electric vacuum, power battery and instrument,and other industries.What will I get?Product Name: Nickel-Plated Steel Strip; Material: Nickel-Plated; Per Roll Total Length: 10m/32.8ft; Tape Width : 5mm/0.2 Inch; Thickness: 0.15mmIs there any advantages of the product?Bright shiny surface, no peeling, no spots, no oxidation, and .Good weldability, high draw tension, easy to operate low resistivity, enabling your job easierHow to use it?Easy to welding, mainly use as battery connector and leading-out chipWhat should I notice?Note：The Opening is sharp. Please wear gloves when using.
4 Set Angle Grinder Side Handle 8mm Thread 135mm Plastic Non-Slip
The whole of the attachments handle is made of plastic, and the threaded part is made of metal, which is durable, waterproof, rust-proof, and corrosion-resistant for long-term use.The anti-slip groove design can effectively prevent slipping and provide a more comfortable grip.Easy to install. The sander handle tool can be fixed with just a few screws. (Note: The mounting screws are not included.)The plastic auxiliary side handle tool is suitable for most s, milling machines, polishers, grinders, etc., which can help ensure smooth polishing, grinding, cutting, etc.
10Pcs Straight Ejector Pins 1mm (3/64″) 65Mn Steel Round Tip Punch 100mm (4″)
Description:1. The ejector pin punch is long, straight, with non-chipping surface, and has a round tip. Not easy to be bent or deformed when working.2. Made of 65Mn manganese steel with quenched and tempered surface treatment and HRC: 48-52rc. This ejecting pin punch has the characteristics of high elastic limit, high strength, high harden-ability and good machinability.3. The steel straight ejector pin, can also be called a punching rod or punching needle which is an essential metal part on stamping die in mechanical tools.4. Suitable for working in high temperature operating environment. Applied in fitter, die manufacturing, leather crafting, machinery maintenance and processing industries. Ejecting or push the plastic parts when in plastic injection punching.
Sausage Caulking Gun – ABS Sealant Cartridge Applicator with Nozzles Translucent
Description:1. The cartridge of the sausage caulking gun is made of lightweight ABS plastic. The fully wrapped cartridge is cleaner and more convenient to use.2. Every time the trigger is pressed, the push rod of this sausage caulking gun pushes better than other guns due to the unique handle structure. Save time on caulking work.3. First press the shrapnel, press the pressure push rod, and then easily pull out the push rod. Then install the required glue and caulk nozzles.4. This sausage tube caulking gun is widely used in construction and houses. Installing door frames, window, siding, roofing, furnishing bathrooms and kitchens caulking gaps.Specification:Cartridge Color: TranslucentMaterial: ABSTotal Size: 480 x 68 x 180mm / 18.9 x 2.68 x 7.09-inch(L*W*H)Package Content:1 x Sausage Caulking Gun1 x Cones Nozzle.