• OUTILLAGE PROFESSIONNEL
  • aval@aval.ma
Nobel
  • Accueil
  • La marque
  • Produits
    • Gammes de produits
    • Notices
    • E-catalogue
  • Services
    • Enquête de satisfaction
    • Notices
    • E-catalogue
  • Contact
  • E-catalogue

Item Tag : in x in

  • Home
  • Items
  • in x in
  • 09/08/2026
  • 0 Comments

Belt Sander 5.3 Amp, 1/2 in. x 18 in. Bandfile Bauer (USA SELLER) BRAND NEW‼️

Belt Sander 5.3 Amp, 1/2 in. x 18 in. Bandfile Bauer (USA SELLER) BRAND NEW‼️. 🔺D E T A I L S 🔻 💢Built for fast stock removal and finishing work, the BAUER™ Bandfile Belt Sander is constructed with a 180° adjustable head ideal for fitting into tight spaces. This bandfile belt sander is built with robust bearings and a 5.3 amp motor ideal for grinding, sanding, deburring, and surface finishing. ▪️1/2 in. belt width ideal for detail work in narrow areas ▪️Stainless steel wear plates for reduced belt friction ▪️Belt tensioning lever for easy belt switches and adjustments ▪️Single hand on/off switch operation easily engages while wearing work gloves ▪️Ergonomic nonslip grip for maximum control ▪️Compact lightweight design for ultimate maneuverability ~•~ ~•~ ~•~ ~•~ ~•~ ~•~ ~•~ ~•~ ~•~ ~•~ ~ ~•~•~ ~•~ ***FAST SHIPPING ***🚀

Read More
  • 09/08/2026
  • 0 Comments

5 in. x 1/4 in. x 7/8 in. 36-Grit INOX Grinding Wheel

5 in. x 1/4 in. x 7/8 in. 36-Grit INOX Grinding Wheel

Read More
  • 09/08/2026
  • 0 Comments

Rikon 10 In. X 18 In. 1/2 Hp Mini Lathe

Rikon 10 In. 1/2 Hp Mini Lathe. 10” x 18” Lathe #70-105 was designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is constructed of cast iron so vibration is not a factor, unlike other lathes made of aluminum.

Read More
  • 09/08/2026
  • 0 Comments

NEW Bandfile Belt Air Sander 3/8 in. x 13 in. Band File with Spare Belt

The Band file Air Belt Sander is constructed. This band file belt sander is built with robust bearings ideal for grinding, sanding. Compact lightweight design for ultimate maneuverability. belt width ideal for detail work in narrow areas.

Read More
  • 09/08/2026
  • 0 Comments

Belt Sander 5.3 Amp, 1/2 in. x 18 in. Bandfile Bauer (USA SELLER) BRAND NEW

BRAND NEW 5.3 Amp, 1/2 in. x 18 in. Bandfile Belt Sander AND 2 FREE BELTSremoved from box to help save you money on high shipping prices.

Read More
  • 09/08/2026
  • 0 Comments

Belt Sander 5.3 Amp, 1/2 in. x 18 in. Bandfile Bauer ~ BRAND NEW

This was factory sealed, I opened it to make sure it wasn’t a repackaged return. Satisfaction guaranteed.

Read More
  • 09/08/2026
  • 0 Comments

The ORIGINAL Dremel tool holder – 1/2 in. X 3/8 in. shank for your lathe!

DTH-.375-XX « A-LEE-SAM » $24.99 MADE FROM 1/2″ ALUMINUM PLATE! This unique metal lathe tool accessory will allow the home shop machinist, model builder, gunsmith, custom Cue maker, (Billiards), ornamental wood turner etc. to be able to utilize their Dremel® tool, (or other moto-tool), on their metal lathe’s 3/8 inch tool holder, and be able to precisely control it’s movement! Check the thread of your Dremel® FIRST then choose your thread size in the drop down list. Made from 1/2″, high strength aluminum plate, with a 3/8 in. tall X 1/2 in. wide shank and tapped EITHER 3/4 X 12 tpi, 3/4 X 16 tpi or M18-1.5mm. By placing the shank in your tool holder, you will be able to use your Dremel® tool as a cut-off tool to very precisely cut your bolts or screws to length! Great for the pen turner who wants to trim the brass inner tube or make his own tubes from bulk tubing! Custom cue makers have found this to be a great item! Precise grinding can be achieved by using the many sizes and profiles of grinding stones, discs etc. on the market while in your lathe’s compound. Placing off-center holes in your projects while held in your lathe’s chuck and using a drill bit in the moto-tool is easier than moving it to the drill press and having to do a set up again! SEE PIC #1 FOR ACTUAL TOOLHOLDER! Use on any lathe capable of using 3/8 inch tall X 1/2 inch wide shank tools. Such as, Taig, Sherline, Atlas, Craftsman, Emco, Prazi, Logan, Monarch, Hardinge, Southbend, and the chinese imports. PLEASE MAKE SURE YOUR LATHE WILL ACCEPT YOUR DREMEL OVER THE COMPOUND/CROSS SLIDE WHILE CENTERED IN YOUR TOOL HOLDER before purchasing! SEE PIC #1 FOR ACTUAL TOOLHOLDER! Most modern, (post 1983), Dremel models have ¾ X 12 tpi ! The only ¾ X 16 tpi models are as follows… Dremel model #’s – #270, 370 & 380 ALL are ¾ X 16 tpi Ryobi model HT20vs is also ¾ X 16 tpi Black and Decker, Craftsman and Alltrade so far seem to be all ¾ X 12 tpi.WEN #2305, (and other modern models) are 3/4″ X 12tpi – (older versions may be M18-1.5mm) Please e-mail me with any questions PRIOR to bidding! The recipient is responsible for all duties, taxes and other fees imposed by that government.

Read More
  • 09/08/2026
  • 0 Comments

BOSCH TOOLS Aluminum Sign 12in x 36in – Mancave Garage Shop Wall Art Sign

12in x 36in printed aluminum sign for BOSCH TOOLS. Sign is printed on high quality. 040 Aluminum with rounded corners, and can be displayed indoors or outdoors. Made in the USA.

Read More
  • 09/08/2026
  • 0 Comments

RIDGID Belt Sander 3 In. X 18 In. Heavy-Duty Variable Speed 6.5 Amp R27401

The RIDGID 3 in. x 18 in. Belt Sander is powered by a robust 6.5 Amp motor to tackle a range of tough jobs. It has a variable-speed dial with electronic feedback to match the speed to the desired removal rate and maintain speed under load for consistent results. Its onboard vacuum adaptor fits a standard 1-1/4 in. hose for a cleaner, virtually dust-free work environment.AirGuard dust collection for collection of 90% of the dustHex grip micro texture for a secure grip and maximum user comfortTool-free belt release to make changing belts quick and easyAutomatic belt tracking to automatically adjust the belt to the center platen for alignmentFlat face that allows for flush sanding against vertical surfacesAccessible brushes that can be serviced quickly for minimum downtimeLifetime service agreement with registration within 90-days of purchase (begins after the warranty period expires)Hex grip micro texture enhanced micro-texture for secure grip and maximum user comfort

Read More
  • 09/08/2026
  • 0 Comments

BLACK+DECKER 3 In. X 21 In. Belt Sander – DS321 (JD-29(

The BLACK+DECKER DS321 3 In. X 21 In. Belt Sander is a corded electric power tool designed for sanding tasks in the workshop or at home. With a voltage of 120V, this belt sander offers a reliable source of power for efficient sanding. Its compact dimensions of 3 inches in height, 21 inches in length, and 6.188 inches in width make it easy to handle and maneuver, while weighing 7.400 pounds it is sturdy and durable for various sanding projects. Perfect for woodworking, metalworking, or general maintenance tasks, this belt sander by BLACK+DECKER is a versatile tool for any DIY enthusiast or professional tradesperson.

Read More

Pagination des publications

Précédent 1 … 5 6 7 8 Suivant

Articles récents

  • Hello world!

Commentaires récents

  • A WordPress Commenter dans Hello world!

OUTILLAGE PROFESSIONNEL
Nous faisons de la satisfaction de nos clients les plus exigeants notre ultime objectif.

Liens directs

  • Accueil
  • La marque
  • Derniers produits
  • Gammes de produits
  • Contact

Nos services

Votre satisfaction est notre unique objectif.

E-catalogue
Notices
Enquête de satisfaction

Inscrivez-vous à notre newsletter

loading...
Copyright © 2026 NOBEL | Tous droits réservés.