MC8K33 Jacobs Multi-Craft 1/2″ Chuck JT33 Vintage Craftsman Drill Press
Jacobs Multi-Craft MC8K33 Chuck with a Taper Bore Mount in very nice condition, as pictured, from a Vintage Craftsman Drill Press 103.23590. 5/64 – 1/2 Capacity. Mount is supposed to be a Jacobs Taper 33, but I do not have machine tools to verify. Includes everything shown. Ships quickly, typically same or next business day.
R8 Drill Chuck Arbor: Choice of JT1 JT2 JT3 JT4 JT6 JT33 or 3/8-24
JT33 These arbors will support drill chucks with one of the listed ends in an R8 spindle. Each arbor is threaded for a 7/16-20 drawbar (drawbar NOT included).
1/32″ – 1/2″ Keyless Chuck JT33 internally threaded 1/4″ x 20 Taper Arbor
used only a few short times, this is in near perfect condition
10in Benchtop Drill Press Tabletop Drilling Machine 610-2800RPM Adjustable
With X-ray positioning for pinpoint accuracy, LED light and 45° tilt adjustable worktable provide flexibility for complex drilling needs. Switch between 5 speed settings by adjusting the belt position, tailoring the benchtop drill press’ s speed to different materials and workpiece sizes for optimal efficiency and precision.
1/2-Inch Key Drill Chuck with one JT33-MT2 Taper Arbor Inner Thread 3/8″X16TP…
1/2-Inch Key Drill Chuck with one JT33-MT2 Taper Arbor Inner Thread 3/8″X16TPI and one JT33-MT1 Taper Arbor Thread 1/4″x20TPI for Drill Press, Wood lathe or Mill. Heavy Duty Drill Chuck holds drill bits, pen mandrel shafts, and workpieces up to 1/2 inch in diameter. Designed Inner Thread 3/8″X16TPI and 1/4″x20TPI on Arbor, when use the drill chuck in the headstock of the lathe, it can be secured against loosening, using together with the draw bar kit. Easily open and close the three chuck jaws using the included key. 3 jaws design drill chuck with excellent clamping capability. Quenching hardening and precision grinding to assure good wear-resistant. Suitable for drilling equipment such as portable driller, drill press, milling machines, lathes, etc.
Drill Press Chuck 1/32 to 1/2 Inch MT2JT33 Lathe 3Jaw with Key
The JT33 Drill Chuck is a high-precision, heavy-duty chuck designed for secure and accurate tool clamping in both machining and woodworking applications. Drill Press Chuck 1/32″-1/2″(1-13mm) MT2-JT33 Lathe Drill Chuck with MT2 Morse Taper Arbor and Chuck Key 3-Jaw for Lathes Drilling Machine.
HHIP 3700-0405 JT6 or JT33 Drill Chuck Removal Wedge Set JT6/JT33
CONFIRM CORRECT SIZE BEFORE ORDERING. These drill chuck removal tools are made to work with your JT6 and JT33 drill chuck. The size of the gap between the drill chuck and arbor for removal will vary depending on the specific chuck and arbor involved.
JT3/JT33 Drill Chuck Removal Wedge Set, 2-Pack Heavy-Duty Alloy Steel Wedge Tool
【Critical Compatibility & Use Guide】- SPECIFICALLY for JT3 and JT33 Tapered Chucks. Always wear safety glasses during operation for complete protection. The tapered design allows for easy insertion.
#1 MT JT33 ARBOR « NEW » DRILL ARBOR #1 JT33
Machinist quality drill chuck arbor. Designed for drilling applications on portable bench, floor type drill presses, mills and lathes. #MT1 x JT33 Drill Chuck Abor.
JT3/JT33 Drill Chuck Removal Wedge Set, 2-Pack Heavy-Duty Alloy Steel Wedge Tool
【Critical Compatibility & Use Guide】- SPECIFICALLY for JT3 and JT33 Tapered Chucks. Always wear safety glasses during operation for complete protection. The tapered design allows for easy insertion.