Foredom A-M89 Tapered Mandrel 1/4″ Shank Mandrel Taper Thread Cone 2-3/4″ Long
TAPERED THREADED MANDREL1/4″ SHANK Cone Point Mandrel Foredom A-M89 🟢 Tapered and threaded mandrel provides the convenience of a tapered mandrel for your flex shaft with this accessory from Foredom®. 🟢 The mandrel will fit into any collet-style handpiece that can accommodate a 1/4″ tool shank. Screw your buff or wheel (1″-3″ in Diameters, with a maximum of 3/8″ arbor hole) onto the mandrel; the threads will keep it securely in place on the mandrel while the flex shaft is running. 🟢 The open-thread design on the accessory ensures good stability along its entire length.🟢 Tapered and threaded mandrels for use with various Wheels, Buffs and Abrasive cone points. 🟢 The sharp spiral threads on the mandrel provide a griping feature on the centers of the material being held. 🟢 Mandrel – Arbor can be used with many rotary tools, including Drills. 🟢 The tapered threads of this mandrel will hold and accommodate small Buffing Wheels, Rubberized and Polishing Felt Buffs, Points, Cones, Bullet shapes and Cylinders. 🔻 Dimensions: JETS Product # 1301-120 🔻 🔸 Overall Length: 2-3/4″ – 70mm . 🔸 Shank Diameter: 1/4″ – 6.26mm 🔸 Shank Length: 47/64″ – 0.73″ – 18.65mm 🔸 Taper Angle: 12º 🔸 Taper Length: 2″ – 51.4mm 🔸 Major Diameter: 31/64″ – 0.484″ – 12.3mm 🔸 Mandrel Weight: 0.84oz. – 23.8gr🔸 Max. speed: 18,000 RPMSALE Is for 1 mandrel SHIPPING: Via USPS First Class Mail NOTE: Visit JETSTOOLS ebay Store Listings, where you can see MANY other types of Mandrels and Arbors in various sizes, along with a line Rotary Tools & Flex-Shafts and a selection of many more Jewelers Equipment Tools and Supplies. JETSINC. e1 419 CKSP Z PA22
Tapered Mandrel Threaded Screw Cone Pointed Mandrel 1/4″ Shank for Rotary Tools
TAPERED THREADED MANDREL THREADED POINTED – SCREW THREAD – MANDRELHARDENED STEEL – LONG LASTING 1/4″ SHANK Cone Point Mandrel a tapered and threaded mandrel for use to hold various Wheels, Buffs and Abrasive cone points. The sharp spiral threads on the mandrel provide a griping feature on the centers of the material being held. Mandrel is ideal for use with 1/4″ Collet Handpieces. Mandrel is made of Hardened Steel, it is heat treated, the taper on the threaded section is a approximately 7 degrees, providing a good hold for pin hole to 1/8″ center hole wheels points etc… see pictures of various items that work with this mandrel. Mandrel – Arbor can be used with many rotary tools, including Foredom #44, 43 (As Pictured 2nd and last images) and 28 Handpieces as well as Hand Drills and die grinders. The tapered threads of this mandrel will hold and accommodate small Buffing Wheels, Rubberized and Polishing Felt Buffs, Points, Cones, Bullet shapes and Cylinders. (As pictured) SPECIFICATIONS: JETS Product # 1603-150200 Made in USA – Material: Steel – Hardened (Heat Treated)- Overall Length: 2″ – 50mm – Shank Diameter: 1/4″ – 6.3mm – Shank Length: 1″ – 26mm – Taper Angle: 7º – Taper Length: 7/8″ – 22.2mm – Major Diameter: 3/8″ -11mm – Mandrel Weight: 0.8oz. – 23gr SALE Is for 1 mandrel SHIPPING: Via USPS First Class Mail NOTE: Visit JETS INC. ebay Store Listings, where you can see MANY other types of Mandrels and Arbors in various sizes, along with a line Rotary Tools & Flex-Shafts and a selection of many more Jewelers Equipment Tools and Supplies. JETSINC. e1 1018 CKSP M