WOODRIVER 1/2″ Keyed Lathe Drill Chuck #1 MT – New! Free Shipping!
The WOODRIVER 1/2″ Keyed Lathe Drill Chuck #1 MT is a high-quality power tool accessory made by WoodRiver in Taiwan. This chuck is designed to securely hold a 1/2″ drill bit for precise and efficient drilling on a lathe. With free shipping included, this product offers convenience and peace of mind for woodworking enthusiasts and professionals alike. Additionally, it is important to note that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm, as indicated by the California Prop 65 Warning.
WOODRIVER 1/2″ Keyed Lathe Drill Chuck #1 MT
NEW, WOODRIVER 1/2″ Keyed Lathe Drill Chuck #1 MT, 154751, Accepts bit shanks from 1/32″ to 1/2″, #1 & #2 MT, Allows the lathe to function like a horizontal drill press, While the lathe tailstock is mostly used to support rotating spindles it can also be used as a collet for a drill chuck or live center. Inserted in the tailstock, a drill chuck allows your lathe to work like a small horizontal drill press. Drill chucks hold forstner bits, brad-point bits or twist bits up to 1/2″ shank diameter for boring out hollow vessels, boxes, vases, depth holes in bowl blanks and much more.
WOODRIVER Turners Collet Chuck Set #2 MT
NEW, WOODRIVER Turners Collet Chuck Set #2 MT, 146110, Includes eight collets which range from 1/8″ to 3/8″ and 1/2″ to 5/8″ by 1/16″, #2 Morse taper, Perfect for holding small pieces, Tight grip with little or no marring, Collet chucks are preferred by woodturners for holding small pieces for turning because the collets grip tight enough to easily hold your work but with little or no marring. Our chuck is built to machinist tolerances and uses interchangeable collets to grip round tenons. The collets, which work just like the chuck in your router, grip with even pressure completely around the tenon on your workpiece. Includes eight collets which range from 1/8″ to 3/8″ and 1/2″ to 5/8″ by 16ths, collet chuck with #2 Morse taper and chuck wrench in a fitted case.
WOODRIVER Deluxe 4 Spur Drive Center with Spring Loaded Center Point #1MT- 5/8″
NEW, WOODRIVER Deluxe 4 Spur Drive Center with Spring Loaded Center Point #1MT- 5/8″, 149172, 4 Spur Drive Center, Spring Loaded Center Point, #1MT- 5/8″ Diameter, WoodRiver Deluxe Drive Centers have sharp spurs for superior bite to help keep even difficult workpieces from tearing out and slipping. The center point is spring loaded so it holds the workpiece in position until the spurs engage, then retracts to prevent splitting your work as it is advanced into the spurs.
WOODRIVER Mortise Chisel Sharpening Kit
NEW, WOODRIVER Mortise Chisel Sharpening Kit, 144385, Sharpens (1/4″, 5/16″, 3/8″, 1/2″) mortise chisels, Mortising chisel sharpener sharpens mortising chisels in seconds! Works with Delta and most Taiwan manufactured mortising chisels. Includes guides for 1/4″, 5/16″, 3/8″ and 1/2″.
WOODRIVER #2 Morse Taper Live Tail Center
NEW, WOODRIVER #2 Morse Taper Live Tail Center, 141060, #2 Morse Taper, Removable point center, It’s time to replace your worn out or solid tail center with an affordable live center! This value-priced #2 Morse Taper center has a removable point center and features smooth ball bearings for long life.
WOODRIVER #1 Morse Taper Live Tail Center
NEW, WOODRIVER #1 Morse Taper Live Tail Center, 141059, Come with removable cup/point and point centers, #1 Morse Taper, It’s time to replace your worn out or solid tail center with an affordable live center! This value-priced #1 Morse Taper center has removable centers. Comes with a point, a cup with point and features smooth ball bearings for long life.
HOODRIVER 5-Piece HSS Turning Parting Tool Set
This five piece economical High Speed Steel (HSS) set is a perfect companion set for mini lathes, or a great addition to any turners tool kit for your turning projects. Set includes 1/8″ and 1/4″ spindle gouges, 1/8″ parting tool, 1/4″ round nose scraper, and 1/4″ skew chisel. Tools are approximately 10″ long,.complete with wooden case. While technically « used » every tool is like new and shows none or little wear. Brand is Hood River.
WOODRIVER Planer Knives for Delta Model 22-540 2 Piece
WOODRIVER Planer Knives for Delta Model 22-540, 2 Piece, 163891, Fits Delta 12″ Portable Planer – Model 22-540, Replacement cross-reference number is Delta #22-547, Constructed of SK5 high carbon steel, Blades are reversible, These WoodRiver® Knives are designed specifically to fit the Delta 12″ Portable Planer – Model 22-540. The replacement cross-reference number is Delta model number 22-547. Blades are reversible and are constructed of SK5 high carbon steel. Set of two knives.
WOODRIVER Anti-Lock Lathe Spindle Washer 1-1/4″
NEW, WOODRIVER Anti-Lock Lathe Spindle Washer 1-1/4″, 149359, Keep your lathe chuck or face plate from getting stuck, Special plastic material, Round shape, 1-1/4″ diameter, Have you ever had your chuck or faceplate stuck on your lathes spindle after using it? This special plastic washer helps prevent stuck chucks and makes removing chucks and face plates from your lathe much easier.