Milwaukee 2854-20 M18 3/8 Compact Impact Wrench w/ Friction ring
Milwaukee 2854-20 M18 3/8 Compact Impact Wrench w/ Friction ring included Overview The M18 FUEL™ 3/8″ Compact Impact Wrench w/ Friction Ring is the most compact in its class, delivering you the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 4.8″ in length with a POWERSTATE™ Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The MILWAUKEE® 3/8″ Compact Impact Wrench has tri-LEDs that surround the anvil to deliver you brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits M18™ tools, delivering more work per charge and more work over the life of the pack. Features 4.8″ in length provides most access in tight spaces The POWERSTATE™ brushless motor delivers up to 250 ft-lbs. of nut-busting torque Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode Auto shut-off mode prevents over tightening and increases productivity by applying no more than 20 ft-lbs. of torque. Bolt-removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened. Mode 1 RPMs: 0-800; Mode 2 RPMs: 0-1,650; Mode 3 RPMs: 0-2,400; Mode 4 RPMs: 0-2,400 Mode 1 IPMs: 0-1,000; Mode 2 IPMs: 0-2,400; Mode 3 IPMs: 0-3,500; Mode 4 IPMs: 0-3,500 REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge Works in up to to 69kV environments Compatible with all M18™ batteries & ChargersSpecs Wrench TypeCompactAnvil TypeFriction RingIPM3500 ipmMaximum Torque250 ft/lbsFastening Torque250.0 ft/lbsNut-Busting Torque250 ft/lbsTool Warranty5 Year Limited WarrantyPower SourceCordlessMotor TypePOWERSTATE™ BrushlessMaterial CompositionAluminumLength4.8 inWeight3.9 lbHeight7.95 inWidth2.56 inBrushlessYesBattery SystemM18Chuck TypeNot ApplicableDRIVE CONTROL4-Mode w/ Auto Shut-Off Mode & Bolt Removal ModeMaximum RPM2400 rpmPeak Torque250 ft/lbs
ACDelco 12V 3/8″ Brushless Ratchet Wrench & Impact Wrench Combo Kit ARW12103-K1
ACDelco 12V 3/8″ Brushless Ratchet Wrench & Impact Wrench Combo Kit ARW12103-K1 Add suggested items to your listings – Check it out on 3Dsellers.com eBay listing template by 3Dsellers.com – Try for Free!
42V Electric Cordless Ratchet 3/8″Right Angle Wrench Impact Power Tool 2 Battery
eBay 42V 3/8″ Cordless Ratchet Wrench Kit with 3″ Long Reach Extended Bar, 1/4″ Adapter, Max 90N.m/66.4 Ft-lbs Electric Power Ratchet Set with Variable Speed Trigger, 2 Packs 7800mAh Lithium-Ion Battery And Charger, 7 Sockets, 2 Screwdriver Bits Powerful Motor: 90N.m (66.4 Ft-lbs) large torque system, 260RPM speed, powerful power and effective protection against machine damage caused by excessive motor temperature.Extended Reach & Compact: 3 inch(7.57cm) extended bar that is designed for tiny, tight, and narrow working environments. It features a powerful fixed speed of 280 RPM, that enables users to utilize to cover a wide range of different tasks. R/F Positive and Negative Design: R/F positive and negative design, easy to disassemble. 2 Pack 7800mAh Large Capacity Battery: Large capacity Lithium-Ion (Li-Ion) battery, easy charging and long battery life. 3/8 » Square Head: 3/8 manganese steel spindle. The metal balls are accurately clamped, and the sleeve can be removed without being removed. 3CM Nose Width: The width of the nose is only 3CM, suitable for small space operation, electric pre-tightening and manual reinforcement. LED Working Light Design: LED work light automatically lights up during work, making it easy to work in the dark. Wide Range of Uses: Truss installation, Wedding construction, car repair, mechanical maintenance. Specification: Right Angle Ratchet Wrench Color: Blue Head Size: 3/8″(10mm) Maximum Torque: 90N.m (66.4 Ft-lbs) Speed: 260 RPM No-load Rotating Speed: 230RPM Angle: 90 degree Input: 110-240V 50/60Hz Battery: 42V 7800mAh Product Size: 50*75*315mm Package: 1 × Electric ratchet wrench, 1 × Carrying bag, 1 × Fast charger, 2 × Batteries, 2 x Screwdriver Bits, 7 × Sockets (10 / 11 / 12 /13 /14 / 15 / 17mm), 1 × 3″ Extension rod, 1 × Adapter in 3/8″F to 1/4″M. All-Copper High Performance MotorUtilizes a powerful motor , which delivers more work per charge and more work over pack life than the competitors, as well as best-in-class performance in extreme job site conditions. High torque output and stable speed, used to help remove screws, please do not demolish. R/F Positive & Negative Design A Forward/Reserve switch on the back of the head and lock switch beside the paddle switch to prevent accidental actuations. LED Light & Ergonomic DesignAfter pressing the switch, the LED light will automatically turn on, and has a 10-second delay off function. It will not turn off immediately after stopping work. The illumination lamp adopts the principle of diffusion and the illumination range is large to ensure a clear view.Lightweight tools designed to fit the users’ needs, Soft grip handle for added comfort and total control without heavy fatigue while using 3/8 » Square Head3/8 inch quick-fit square head, can be equipped with different specifications of sleeves, easy to replace the sleeve.3cm Nose Width. The width of the nose is only 3CM, suitable for small space operation, electric pre-tightening and manual reinforcement. Large Capacity BatteryPowered by the 42Vf, 7800 mAH Lithium-ion battery for strong and steady power and endurable run time, which is supplied with the battery charger, simple and convenient to charge; Efficient ventilation and heat dissipation, will not be hot after long-term use ApplicationAn ideal tool for auto mechanics, maintenance and repair professionals who seek the highest performance and productivity in ultra-small cordless tools.This wrench has a small working head with strong power so that it can be used for one-hand operation in both narrow and wide spaced sections. Warranty If you have any questions you may reach us via ebay message. Get In Touch We warrant all products to be free from defects in material or workmanship for two month from date of purchase. We fully guarantee customers an exchange or refund within 14 business days of receipt if item DOA(damage on arrival). Warranty excludes normal product lifetime wear-out, wear and tear or abuse. Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration. For malfunction products under warranty period, please contact our customer service via EBay Message. Payment Only PayPal accepted. All orders delivered to California (CA) are charged the applicable sales tax. Shipment We only ship to paypal confirmed address. We will ship all orders asap. from Texas via USPS or UPS.( No service on Weekend and public holidays). Delivery time within the U.S. is usually just 3 to 5 business days, however in rare cases it could take 5 to 7 business days. No combined shipping discount offered and no pick-up service. Customer Service Customer Satisfaction is always our Top Priority. If you feel any dissatisfaction, please contact us via ebay message. A Merchandise Authorization Number (RMA#) is required for all need returned packages(After we have a fully communication). Please contact us to get an « »RMA » » number before you ship your items back to us. Items returned without an « »RMA » » number would be ignored or delayed in processing. back to us. Items returned without an « »RMA » » number would be ignored or delayed in processing.All NON-Seller Mistake returns for refund are subject to 20% re-stocking fee and buyer should pay for the return shipping fee and handle fee.(For example,you brought wrong item or cancelled order after item was shipped). All return products should be in brand new state with all accessories included. Refunds will be given via paypal only.