2 Rear Notch Bandsaw Table Insert For Delta 14″ 426-02-063-0001 426-02-063-0002
Specifications
| Brand | haiouus |
| Compatible Brand | For Delta |
| UPC | 360707739581 |
Replace Part: 426-02-063-0001 426-02-063-0002 2 & 1/2" X .100 thick Please measure your sawmill recess to ensure proper mounting location. They fit Delta, Rockwell, some Jet, Ridgid, Grizzly and other imports. Compatible With Delta 14" (LBS-56) and most import bandsaws: 8-243、28-299、28-300、328-03、28-306、28-345、28-348、28-350、28-365、28-366、 28-380、28-245、28-248、28-254、255、28-262、28-263、28-269、28-270、28-275、28-278、28-280、28- 283、28-285、28-290、28-293 Installation Note: First make sure the edges of the holes are free of dirt. If the table alignment pins are not tight or are missing, usually the blade mounting slots will close up a bit over time, which slightly reduces the diameter of the insertion holes. I tap a flathead screwdriver into the blade mounting slot a bit to wedge it open. This s.