2 Rear Notch Bandsaw Table Insert For Delta 14″ 426-02-063-0001 426-02-063-0002
Replace Part: 426-02-063-0001 426-02-063-0002 2 & 1/2″ X .100 thick Please measure your sawmill recess to ensure proper mounting location. They fit Delta, Rockwell, some Jet, Ridgid, Grizzly and other imports. Compatible With Delta 14″ (LBS-56) and most import bandsaws: 8-243、28-299、28-300、328-03、28-306、28-345、28-348、28-350、28-365、28-366、 28-380、28-245、28-248、28-254、255、28-262、28-263、28-269、28-270、28-275、28-278、28-280、28- 283、28-285、28-290、28-293 Installation Note: First make sure the edges of the holes are free of dirt. If the table alignment pins are not tight or are missing, usually the blade mounting slots will close up a bit over time, which slightly reduces the diameter of the insertion holes. I tap a flathead screwdriver into the blade mounting slot a bit to wedge it open. This s.
Delta 14 in Bsaw Guide bracket assembly LBS-127 462-02-089-0002 for 1 »post(7-2)
Delta 14″ Bandsaw Upper Blade Guide casting assembly for Delta bandsaws that have a 1″ round or 7/8 hex shaft. It has a 1″ round shaft hole. I may be able to machine them to a different size if needed, Inquire. Ships unassembled. Includes items numbered 89, 90, 91, 92, 95, 96, 98, 99, 100, 101 below: Also now includes (2) Cool blocks GUIDE ADJUSTMENT: To adjust the guide first move both upper and lower guides away from blade so it does not touch them.Next track your blade so it is in the center of the wheels. Then move the lower side guides so that they just touch the blade behind the teeth. Repeat with upper guide. Then adjust the thrust bearings so that they almost touche the rear edge of the blade with no load. *Buyer is responsible for custom charges from their country* 20% restocking fee on returns All sales ship to address registered with Ebay at the time of the sale.